#include "CCPACSImportExport.h"
#include "Standard.hxx"
#include "tigl_internal.h"
#include "gp_Pnt.hxx"
#include "gp_Vec.hxx"
#include "gp_Pln.hxx"
#include "TopoDS_Shape.hxx"
#include <TopoDS_Edge.hxx>
#include "PNamedShape.h"
#include "ListPNamedShape.h"
#include "CTiglIntersectionPoint.h"
#include "CCPACSConfiguration.h"
#include "CTiglRelativelyPositionedComponent.h"
#include <Geom_BSplineCurve.hxx>
#include <TopTools_ListOfShape.hxx>
#include "TColgp_HArray1OfPnt.hxx"
#include <map>
#include <string>
#include <vector>
#include <algorithm>
#include "UniquePtr.h"

Data Structures
struct	IsInsideTolerance

struct	UVResult
	The UVResult struct is used as an output for GetFaceAndUV. More...

Typedefs
typedef std::map< std::string, PNamedShape >	ShapeMap

Enumerations
enum	IntStatus { BetweenPoints, OutsideBefore, OutsideAfter, NoIntersection }

Functions
template<typename ForwardIter >
bool	AllSame (ForwardIter begin, ForwardIter end)

TIGL_EXPORT opencascade::handle< Geom_BSplineCurve >	ApproximateArcOfCircleToRationalBSpline (double cornerRadius, double uMin=0, double uMax=M_PI/4, double tol=1e-6, double y_position=0., double z_position=0.)
	ApproximateArcOfCircleToRationalBSpline The result of this function is a non-rational B-Spline curve that approximates an arc of circle in the y-z plane. Its center is given by the y- and z-position. The angle is given in rad. The direction of rotation is counter-clockwise, starting with alpha=0 on the positive y-axis, with z=0. More...

TIGL_EXPORT TopoDS_Face	BuildFace (const gp_Pnt &p1, const gp_Pnt &p2, const gp_Pnt &p3, const gp_Pnt &p4)

TIGL_EXPORT TopoDS_Face	BuildFace (const TopoDS_Wire &wire1, const TopoDS_Wire &wire2)

TIGL_EXPORT TopoDS_Face	BuildFace (const TopoDS_Wire &wire1, const TopoDS_Wire &wire2, const gp_Vec &dir)

TIGL_EXPORT TopoDS_Face	BuildFace (const TopoDS_Wire &wire)

TIGL_EXPORT TopoDS_Face	BuildRuledFace (const TopoDS_Wire &wire1, const TopoDS_Wire &wire2)

TIGL_EXPORT TopoDS_Wire	BuildWire (const gp_Pnt &p1, const gp_Pnt &p2)

TIGL_EXPORT TopoDS_Wire	BuildWireFromEdges (const TopoDS_Shape &edges)

TIGL_EXPORT TopoDS_Wire	BuildWireRectangle (const double heightToWidthRatio, const double cornerRadius=0.0, const double tol=Precision::Approximation())
	BuildWireRectangle Builds a rectangular wire in (y,z) - plane with width 1, center of coordinate system is the center of the rectangle. More...

TIGL_EXPORT void	BuildWiresFromConnectedEdges (const TopoDS_Shape &shape, TopTools_ListOfShape &wireList)

TIGL_EXPORT TopoDS_Wire	BuildWireSuperEllipse (const double lowerHeightFraction, const double mLower, const double mUpper, const double nLower, const double nUpper, const double tol=Precision::Approximation())
	BuildWireSuperellipse Builds a superelliptic wire in (y,z) - plane with width 1 and height 1. More...

TIGL_EXPORT bool	CheckCommonVertex (const TopoDS_Edge &e1, const TopoDS_Edge &e2)

TIGL_EXPORT int	Clamp (int val, int min, int max)

TIGL_EXPORT double	Clamp (double val, double min, double max)

TIGL_EXPORT size_t	Clamp (size_t val, size_t min, size_t max)

TIGL_EXPORT TopoDS_Wire	CloseWire (const TopoDS_Wire &wire)

TIGL_EXPORT TopoDS_Wire	CloseWires (const TopoDS_Wire &wire1, const TopoDS_Wire &wire2)

TIGL_EXPORT TopoDS_Wire	CloseWires (const TopoDS_Wire &wire1, const TopoDS_Wire &wire2, const gp_Vec &dir)

template<typename ArrayLike , typename ValueType >
bool	Contains (const ArrayLike &array, ValueType val, ValueType tolerance)
	Checks, whether an array contains a value or not. More...

TIGL_EXPORT TopoDS_Shape	CutShapes (const TopoDS_Shape &shape1, const TopoDS_Shape &shape2)

double	Degrees (double radians)

TIGL_EXPORT gp_Pnt	EdgeGetPoint (const TopoDS_Edge &edge, double alpha)

TIGL_EXPORT void	EdgeGetPointTangent (const TopoDS_Edge &edge, double alpha, gp_Pnt &point, gp_Vec &normal)

TIGL_EXPORT void	EdgeGetPointTangentBasedOnParam (const TopoDS_Edge &edge, double alpha, gp_Pnt &point, gp_Vec &tangent)

TIGL_EXPORT TopoDS_Edge	EdgeSplineFromPoints (const std::vector< gp_Pnt > &points)

TIGL_EXPORT std::string	FileExtension (const std::string &filename)

TIGL_EXPORT void	FindAllConnectedEdges (const TopoDS_Edge &edge, TopTools_ListOfShape &edgeList, TopTools_ListOfShape &targetList)

template<typename ForwardIter , typename Compare >
size_t	FindIndex (ForwardIter begin, ForwardIter end, Compare comp)
	Searches for a entry in a range and returns its index. More...

TIGL_EXPORT double	GetArea (const TopoDS_Shape &shape)

TIGL_EXPORT gp_Pnt	GetCenterOfMass (const TopoDS_Shape &shape)

TIGL_EXPORT gp_Pnt	GetCentralFacePoint (const class TopoDS_Face &face)

TIGL_EXPORT int	GetComponentHashCode (tigl::ITiglGeometricComponent &)

TIGL_EXPORT TopoDS_Edge	GetEdge (const TopoDS_Shape &shape, int iEdge)

TIGL_EXPORT TiglContinuity	getEdgeContinuity (const TopoDS_Edge &edge1, const TopoDS_Edge &edge2)

TIGL_EXPORT void	GetEndVertices (const TopoDS_Shape &shape, TopTools_ListOfShape &endVertices)

TIGL_EXPORT TopoDS_Face	GetFace (const TopoDS_Shape &shape, int iFace)

TIGL_EXPORT boost::optional< UVResult >	GetFaceAndUV (TopoDS_Shape const &shape, gp_Pnt const &pnt, double tol=1e-3)
	Given a point on a shape, GetFaceAndUV finds all faces which contain the point and determines its (u,v)-coordinates on that face. More...

TIGL_EXPORT TopoDS_Shape	GetFacesByName (const PNamedShape shape, const std::string &name)

TIGL_EXPORT gp_Pnt	GetFirstPoint (const TopoDS_Shape &wireOrEdge)

TIGL_EXPORT gp_Pnt	GetFirstPoint (const TopoDS_Wire &w)

TIGL_EXPORT gp_Pnt	GetFirstPoint (const TopoDS_Edge &e)

TIGL_EXPORT int	GetHash (const TopoDS_Shape &shape)

TIGL_EXPORT bool	GetIntersectionPoint (const TopoDS_Face &face, const TopoDS_Edge &edge, gp_Pnt &dst, double tolerance=Precision::Confusion())

TIGL_EXPORT bool	GetIntersectionPoint (const TopoDS_Face &face, const TopoDS_Wire &wire, gp_Pnt &dst, double tolerance=Precision::Confusion())

TIGL_EXPORT bool	GetIntersectionPoint (const TopoDS_Wire &wire1, const TopoDS_Wire &wire2, intersectionPointList &intersectionPoints, const double tolerance=Precision::SquareConfusion())

TIGL_EXPORT gp_Pnt	GetLastPoint (const TopoDS_Shape &wireOrEdge)

TIGL_EXPORT gp_Pnt	GetLastPoint (const TopoDS_Wire &w)

TIGL_EXPORT gp_Pnt	GetLastPoint (const TopoDS_Edge &e)

TIGL_EXPORT Standard_Real	GetLength (const TopoDS_Wire &wire)

TIGL_EXPORT Standard_Real	GetLength (const TopoDS_Edge &edge)

TIGL_EXPORT void	GetListOfShape (const TopoDS_Shape &shape, TopAbs_ShapeEnum type, TopTools_ListOfShape &result)

TIGL_EXPORT bool	GetMinMaxPoint (const TopoDS_Shape &shape, const gp_Vec &dir, gp_Pnt &minPnt, gp_Pnt &maxPnt)

TIGL_EXPORT TopoDS_Face	GetNearestFace (const TopoDS_Shape &src, const gp_Pnt &pnt)

TIGL_EXPORT unsigned int	GetNumberOfEdges (const TopoDS_Shape &shape)

TIGL_EXPORT unsigned int	GetNumberOfFaces (const TopoDS_Shape &shape)

TIGL_EXPORT unsigned int	GetNumberOfSubshapes (const TopoDS_Shape &shape)

TIGL_EXPORT void	GetShapeExtension (const TopoDS_Shape &shape, double &minx, double &maxx, double &miny, double &maxy, double &minz, double &maxz)

TIGL_EXPORT TopoDS_Face	GetSingleFace (const TopoDS_Shape &shape)

TIGL_EXPORT std::vector< TopoDS_Shape >	GetSubShapes (const TopoDS_Shape &shape, TopAbs_ShapeEnum type)

TIGL_EXPORT ListPNamedShape	GroupFaces (const PNamedShape shape, tigl::ShapeGroupMode groupType)

TIGL_EXPORT	Handle (Geom_BSplineCurve) GetBSplineCurve(const TopoDS_Edge &e)

template<typename T >
TIGL_EXPORT Handle(TColgp_HArray1OfPnt) OccArray(const std TIGL_EXPORT Handle(TColgp_HArray1OfPnt) OccArray(const std TIGL_EXPORT Handle(TColStd_HArray1OfReal) OccFArray(const std TIGL_EXPORT Handle(TColStd_HArray1OfInteger) OccIArray(const std size_t	IndexFromUid (const std::vector< std::unique_ptr< T > > &vectorOfPointers, const std::string &uid)
	Converters between std::vectors and opencascade vectors. More...

TIGL_EXPORT IntStatus	IntersectLinePlane (gp_Pnt p1, gp_Pnt p2, gp_Pln plane, gp_Pnt &result)

TIGL_EXPORT Standard_Boolean	IsEqual (const TopoDS_Shape &s1, const TopoDS_Shape &s2)

TIGL_EXPORT bool	IsFaceBetweenPoints (const TopoDS_Face &face, gp_Pnt p1, gp_Pnt p2)

TIGL_EXPORT bool	IsFileReadable (const std::string &filename)

TIGL_EXPORT bool	IsPathRelative (const std::string &)

TIGL_EXPORT bool	IsPointAbovePlane (const gp_Pln &pln, gp_Pnt point)

TIGL_EXPORT bool	IsPointInsideFace (const TopoDS_Face &face, gp_Pnt point)

TIGL_EXPORT bool	IsPointInsideShape (const TopoDS_Shape &solid, gp_Pnt point, Bnd_Box const *bounding_box=nullptr)

TIGL_EXPORT std::vector< double >	LinspaceWithBreaks (double umin, double umax, size_t n_values, const std::vector< double > &breaks={})

TIGL_EXPORT double	Mix (double x, double y, double a)

TIGL_EXPORT double	NormalizeAngleDeg (double angleDeg)

TIGL_EXPORT Standard_Real	ProjectPointOnLine (gp_Pnt p, gp_Pnt lineStart, gp_Pnt lineStop)

TIGL_EXPORT gp_Pnt2d	ProjectPointOnPlane (gp_Pln pln, gp_Pnt p)

TIGL_EXPORT gp_Pnt	ProjectPointOnShape (const TopoDS_Shape &shape, const gp_Pnt &point, const gp_Vec &direction)

TIGL_EXPORT Standard_Real	ProjectPointOnWire (const TopoDS_Wire &wire, gp_Pnt p)

TIGL_EXPORT Standard_Real	ProjectPointOnWireAtAngle (const TopoDS_Wire &wire, gp_Pnt p, gp_Dir rotationAxisAroundP, double angle)

double	Radians (double degree)

TIGL_EXPORT TopoDS_Shape	RemoveDuplicateEdges (const TopoDS_Shape &shape)

template<class ArrayType , typename BinaryPredicate , typename BinaryMerge >
void	ReplaceAdjacentWithMerged (ArrayType &list, BinaryPredicate is_adjacent, BinaryMerge merged)

TIGL_EXPORT TopoDS_Shape	ReplaceFaceInShape (TopoDS_Shape const &shape, TopoDS_Face const &new_face, TopoDS_Face const &old_face)
	ReplaceFaceInShape returns a new shape that corresponds to the input shape, except that old_face is replaced by new_face. More...

TIGL_EXPORT TopoDS_Wire	SortWireEdges (const TopoDS_Wire &wire)

TIGL_EXPORT TopoDS_Shape	SplitShape (const TopoDS_Shape &src, const TopoDS_Shape &tool)

TIGL_EXPORT tigl::CTiglPoint	TiglAxisToCTiglPoint (TiglAxis axis)

TIGL_EXPORT TopoDS_Shape	TransformedShape (const tigl::CTiglTransformation &transformationToGlobal, TiglCoordinateSystem cs, const TopoDS_Shape &shape)

TIGL_EXPORT TopoDS_Shape	TransformedShape (const tigl::CTiglRelativelyPositionedComponent &component, TiglCoordinateSystem cs, const TopoDS_Shape &shape)

TIGL_EXPORT TopoDS_Face	TrimFace (TopoDS_Face const &face, double umin, double umax, double vmin, double vmax)
	TrimFace trims a face given new minimum and maximum values for the (u,v)- coordinates. More...

TIGL_EXPORT gp_Pnt	WireGetPoint (const TopoDS_Wire &wire, double alpha)

TIGL_EXPORT void	WireGetPointTangent (const TopoDS_Wire &wire, double alpha, gp_Pnt &point, gp_Vec &normal)

Typedef Documentation

◆ ShapeMap

typedef std::map<std::string, PNamedShape> ShapeMap

Enumeration Type Documentation

◆ IntStatus

enum IntStatus

Enumerator
BetweenPoints
OutsideBefore
OutsideAfter
NoIntersection

Function Documentation

◆ AllSame()

template<typename ForwardIter >

bool AllSame	(	ForwardIter	begin,
		ForwardIter	end
	)

Returns true, if all elements are the same

◆ ApproximateArcOfCircleToRationalBSpline()

TIGL_EXPORT opencascade::handle<Geom_BSplineCurve> ApproximateArcOfCircleToRationalBSpline	(	double	cornerRadius,
		double	uMin = `0`,
		double	uMax = `M_PI/4`,
		double	tol = `1e-6`,
		double	y_position = `0.`,
		double	z_position = `0.`
	)

ApproximateArcOfCircleToRationalBSpline The result of this function is a non-rational B-Spline curve that approximates an arc of circle in the y-z plane. Its center is given by the y- and z-position. The angle is given in rad. The direction of rotation is counter-clockwise, starting with alpha=0 on the positive y-axis, with z=0.

Parameters

cornerRadius	Radius of the circle
uMin	Starting parameter in rad. Range: [0,2*Pi]
uMax
tol	Tolerance
y_position
z_position

Returns: opencascade::handle<Geom_BSplineCurve>

◆ BuildFace() [1/4]

TIGL_EXPORT TopoDS_Face BuildFace	(	const gp_Pnt &	p1,
		const gp_Pnt &	p2,
		const gp_Pnt &	p3,
		const gp_Pnt &	p4
	)

◆ BuildFace() [2/4]

TIGL_EXPORT TopoDS_Face BuildFace	(	const TopoDS_Wire &	wire1,
		const TopoDS_Wire &	wire2
	)

◆ BuildFace() [3/4]

TIGL_EXPORT TopoDS_Face BuildFace	(	const TopoDS_Wire &	wire1,
		const TopoDS_Wire &	wire2,
		const gp_Vec &	dir
	)

◆ BuildFace() [4/4]

TIGL_EXPORT TopoDS_Face BuildFace ( const TopoDS_Wire & wire )

◆ BuildRuledFace()

TIGL_EXPORT TopoDS_Face BuildRuledFace	(	const TopoDS_Wire &	wire1,
		const TopoDS_Wire &	wire2
	)

◆ BuildWire()

TIGL_EXPORT TopoDS_Wire BuildWire	(	const gp_Pnt &	p1,
		const gp_Pnt &	p2
	)

◆ BuildWireFromEdges()

TIGL_EXPORT TopoDS_Wire BuildWireFromEdges ( const TopoDS_Shape & edges )

◆ BuildWireRectangle()

TIGL_EXPORT TopoDS_Wire BuildWireRectangle	(	const double	heightToWidthRatio,
		const double	cornerRadius = `0.0`,
		const double	tol = `Precision::Approximation()`
	)

BuildWireRectangle Builds a rectangular wire in (y,z) - plane with width 1, center of coordinate system is the center of the rectangle.

Parameters

heightToWidthRatio
cornerRadius
tol

Returns: TopoDS_Wire

◆ BuildWiresFromConnectedEdges()

TIGL_EXPORT void BuildWiresFromConnectedEdges	(	const TopoDS_Shape &	shape,
		TopTools_ListOfShape &	wireList
	)

◆ BuildWireSuperEllipse()

TIGL_EXPORT TopoDS_Wire BuildWireSuperEllipse	(	const double	lowerHeightFraction,
		const double	mLower,
		const double	mUpper,
		const double	nLower,
		const double	nUpper,
		const double	tol = `Precision::Approximation()`
	)

BuildWireSuperellipse Builds a superelliptic wire in (y,z) - plane with width 1 and height 1.

Parameters

lowerHeightFraction	Fraction of height of the lower semi_ellipse relative to the toal height
mLower	Exponent m for lower semi-ellipse
mUpper	Exponent m for upper semi-ellipse
nLower	Exponent n for lower semi-ellipse
nUpper	Exponent n for upper semi-ellipse
tol	Tolerance required for approximation of the superellipse as a b-spline curve

Returns

◆ CheckCommonVertex()

TIGL_EXPORT bool CheckCommonVertex	(	const TopoDS_Edge &	e1,
		const TopoDS_Edge &	e2
	)

◆ Clamp() [1/3]

TIGL_EXPORT int Clamp	(	int	val,
		int	min,
		int	max
	)

◆ Clamp() [2/3]

TIGL_EXPORT double Clamp	(	double	val,
		double	min,
		double	max
	)

◆ Clamp() [3/3]

TIGL_EXPORT size_t Clamp	(	size_t	val,
		size_t	min,
		size_t	max
	)

◆ CloseWire()

TIGL_EXPORT TopoDS_Wire CloseWire ( const TopoDS_Wire & wire )

◆ CloseWires() [1/2]

TIGL_EXPORT TopoDS_Wire CloseWires	(	const TopoDS_Wire &	wire1,
		const TopoDS_Wire &	wire2
	)

◆ CloseWires() [2/2]

TIGL_EXPORT TopoDS_Wire CloseWires	(	const TopoDS_Wire &	wire1,
		const TopoDS_Wire &	wire2,
		const gp_Vec &	dir
	)

◆ Contains()

template<typename ArrayLike , typename ValueType >

bool Contains	(	const ArrayLike &	array,
		ValueType	val,
		ValueType	tolerance
	)

Checks, whether an array contains a value or not.

Parameters

array	The array to be searched in
val	The value to be saerched for
tolerance	This functions is typically used with floating point values. The tolerance allows to search for a value within the specified tolerance.

◆ CutShapes()

TIGL_EXPORT TopoDS_Shape CutShapes	(	const TopoDS_Shape &	shape1,
		const TopoDS_Shape &	shape2
	)

◆ Degrees()

double Degrees ( double radians )

inline

◆ EdgeGetPoint()

TIGL_EXPORT gp_Pnt EdgeGetPoint	(	const TopoDS_Edge &	edge,
		double	alpha
	)

◆ EdgeGetPointTangent()

TIGL_EXPORT void EdgeGetPointTangent	(	const TopoDS_Edge &	edge,
		double	alpha,
		gp_Pnt &	point,
		gp_Vec &	normal
	)

◆ EdgeGetPointTangentBasedOnParam()

TIGL_EXPORT void EdgeGetPointTangentBasedOnParam	(	const TopoDS_Edge &	edge,
		double	alpha,
		gp_Pnt &	point,
		gp_Vec &	tangent
	)

◆ EdgeSplineFromPoints()

TIGL_EXPORT TopoDS_Edge EdgeSplineFromPoints ( const std::vector< gp_Pnt > & points )

◆ FileExtension()

TIGL_EXPORT std::string FileExtension ( const std::string & filename )

◆ FindAllConnectedEdges()

TIGL_EXPORT void FindAllConnectedEdges	(	const TopoDS_Edge &	edge,
		TopTools_ListOfShape &	edgeList,
		TopTools_ListOfShape &	targetList
	)

◆ FindIndex()

template<typename ForwardIter , typename Compare >

size_t FindIndex	(	ForwardIter	begin,
		ForwardIter	end,
		Compare	comp
	)

Searches for a entry in a range and returns its index.

This function can be used with std::arrays, std::vectors and also possible other containers supported by std::distance

If the index is not found, the size of the range will be returned instead

◆ GetArea()

TIGL_EXPORT double GetArea ( const TopoDS_Shape & shape )

◆ GetCenterOfMass()

TIGL_EXPORT gp_Pnt GetCenterOfMass ( const TopoDS_Shape & shape )

◆ GetCentralFacePoint()

TIGL_EXPORT gp_Pnt GetCentralFacePoint ( const class TopoDS_Face & face )

◆ GetComponentHashCode()

TIGL_EXPORT int GetComponentHashCode ( tigl::ITiglGeometricComponent & )

◆ GetEdge()

TIGL_EXPORT TopoDS_Edge GetEdge	(	const TopoDS_Shape &	shape,
		int	iEdge
	)

◆ getEdgeContinuity()

TIGL_EXPORT TiglContinuity getEdgeContinuity	(	const TopoDS_Edge &	edge1,
		const TopoDS_Edge &	edge2
	)

◆ GetEndVertices()

TIGL_EXPORT void GetEndVertices	(	const TopoDS_Shape &	shape,
		TopTools_ListOfShape &	endVertices
	)

◆ GetFace()

TIGL_EXPORT TopoDS_Face GetFace	(	const TopoDS_Shape &	shape,
		int	iFace
	)

◆ GetFaceAndUV()

TIGL_EXPORT boost::optional<UVResult> GetFaceAndUV	(	TopoDS_Shape const &	shape,
		gp_Pnt const &	pnt,
		double	tol = `1e-3`
	)

Given a point on a shape, GetFaceAndUV finds all faces which contain the point and determines its (u,v)-coordinates on that face.

It is assumes that the point is on the shape. Typically this function would be used on the output of ProjectPointOnShape.

Parameters

shape	Input shape
pnt	Input point
tol	a tolerance for the squared distance of the point

Returns: a boost::optional<UVResult> instance containing the face together with the (u,v) coordinates of the point on that face, if the algorithm succeeded

◆ GetFacesByName()

TIGL_EXPORT TopoDS_Shape GetFacesByName	(	const PNamedShape	shape,
		const std::string &	name
	)

◆ GetFirstPoint() [1/3]

TIGL_EXPORT gp_Pnt GetFirstPoint ( const TopoDS_Shape & wireOrEdge )

◆ GetFirstPoint() [2/3]

TIGL_EXPORT gp_Pnt GetFirstPoint ( const TopoDS_Wire & w )

◆ GetFirstPoint() [3/3]

TIGL_EXPORT gp_Pnt GetFirstPoint ( const TopoDS_Edge & e )

◆ GetHash()

TIGL_EXPORT int GetHash ( const TopoDS_Shape & shape )

◆ GetIntersectionPoint() [1/3]

TIGL_EXPORT bool GetIntersectionPoint	(	const TopoDS_Face &	face,
		const TopoDS_Edge &	edge,
		gp_Pnt &	dst,
		double	tolerance = `Precision::Confusion()`
	)

◆ GetIntersectionPoint() [2/3]

TIGL_EXPORT bool GetIntersectionPoint	(	const TopoDS_Face &	face,
		const TopoDS_Wire &	wire,
		gp_Pnt &	dst,
		double	tolerance = `Precision::Confusion()`
	)

◆ GetIntersectionPoint() [3/3]

TIGL_EXPORT bool GetIntersectionPoint	(	const TopoDS_Wire &	wire1,
		const TopoDS_Wire &	wire2,
		intersectionPointList &	intersectionPoints,
		const double	tolerance = `Precision::SquareConfusion()`
	)

◆ GetLastPoint() [1/3]

TIGL_EXPORT gp_Pnt GetLastPoint ( const TopoDS_Shape & wireOrEdge )

◆ GetLastPoint() [2/3]

TIGL_EXPORT gp_Pnt GetLastPoint ( const TopoDS_Wire & w )

◆ GetLastPoint() [3/3]

TIGL_EXPORT gp_Pnt GetLastPoint ( const TopoDS_Edge & e )

◆ GetLength() [1/2]

TIGL_EXPORT Standard_Real GetLength ( const TopoDS_Wire & wire )

◆ GetLength() [2/2]

TIGL_EXPORT Standard_Real GetLength ( const TopoDS_Edge & edge )

◆ GetListOfShape()

TIGL_EXPORT void GetListOfShape	(	const TopoDS_Shape &	shape,
		TopAbs_ShapeEnum	type,
		TopTools_ListOfShape &	result
	)

◆ GetMinMaxPoint()

TIGL_EXPORT bool GetMinMaxPoint	(	const TopoDS_Shape &	shape,
		const gp_Vec &	dir,
		gp_Pnt &	minPnt,
		gp_Pnt &	maxPnt
	)

◆ GetNearestFace()

TIGL_EXPORT TopoDS_Face GetNearestFace	(	const TopoDS_Shape &	src,
		const gp_Pnt &	pnt
	)

◆ GetNumberOfEdges()

TIGL_EXPORT unsigned int GetNumberOfEdges ( const TopoDS_Shape & shape )

◆ GetNumberOfFaces()

TIGL_EXPORT unsigned int GetNumberOfFaces ( const TopoDS_Shape & shape )

◆ GetNumberOfSubshapes()

TIGL_EXPORT unsigned int GetNumberOfSubshapes ( const TopoDS_Shape & shape )

◆ GetShapeExtension()

TIGL_EXPORT void GetShapeExtension	(	const TopoDS_Shape &	shape,
		double &	minx,
		double &	maxx,
		double &	miny,
		double &	maxy,
		double &	minz,
		double &	maxz
	)

◆ GetSingleFace()

TIGL_EXPORT TopoDS_Face GetSingleFace ( const TopoDS_Shape & shape )

◆ GetSubShapes()

TIGL_EXPORT std::vector<TopoDS_Shape> GetSubShapes	(	const TopoDS_Shape &	shape,
		TopAbs_ShapeEnum	type
	)

◆ GroupFaces()

TIGL_EXPORT ListPNamedShape GroupFaces	(	const PNamedShape	shape,
		tigl::ShapeGroupMode	groupType
	)

◆ Handle()

TIGL_EXPORT Handle ( Geom_BSplineCurve ) const &

◆ IndexFromUid()

template<typename T >

TIGL_EXPORT Handle (TColgp_HArray1OfPnt) OccArray( const std TIGL_EXPORT Handle (TColgp_HArray1OfPnt) OccArray( const std TIGL_EXPORT Handle (TColStd_HArray1OfReal) OccFArray( const std TIGL_EXPORT Handle (TColStd_HArray1OfInteger) OccIArray( const std size_t IndexFromUid	(	const std::vector< std::unique_ptr< T > > &	vectorOfPointers,
		const std::string &	uid
	)		const

Converters between std::vectors and opencascade vectors.

◆ IntersectLinePlane()

TIGL_EXPORT IntStatus IntersectLinePlane	(	gp_Pnt	p1,
		gp_Pnt	p2,
		gp_Pln	plane,
		gp_Pnt &	result
	)

◆ IsEqual()

TIGL_EXPORT Standard_Boolean IsEqual	(	const TopoDS_Shape &	s1,
		const TopoDS_Shape &	s2
	)

◆ IsFaceBetweenPoints()

TIGL_EXPORT bool IsFaceBetweenPoints	(	const TopoDS_Face &	face,
		gp_Pnt	p1,
		gp_Pnt	p2
	)

◆ IsFileReadable()

TIGL_EXPORT bool IsFileReadable ( const std::string & filename )

◆ IsPathRelative()

TIGL_EXPORT bool IsPathRelative ( const std::string & )

◆ IsPointAbovePlane()

TIGL_EXPORT bool IsPointAbovePlane	(	const gp_Pln &	pln,
		gp_Pnt	point
	)

◆ IsPointInsideFace()

TIGL_EXPORT bool IsPointInsideFace	(	const TopoDS_Face &	face,
		gp_Pnt	point
	)

◆ IsPointInsideShape()

TIGL_EXPORT bool IsPointInsideShape	(	const TopoDS_Shape &	solid,
		gp_Pnt	point,
		Bnd_Box const *	bounding_box = `nullptr`
	)

◆ LinspaceWithBreaks()

TIGL_EXPORT std::vector<double> LinspaceWithBreaks	(	double	umin,
		double	umax,
		size_t	n_values,
		const std::vector< double > &	breaks = `{}`
	)

◆ Mix()

TIGL_EXPORT double Mix	(	double	x,
		double	y,
		double	a
	)

◆ NormalizeAngleDeg()

TIGL_EXPORT double NormalizeAngleDeg ( double angleDeg )

◆ ProjectPointOnLine()

TIGL_EXPORT Standard_Real ProjectPointOnLine	(	gp_Pnt	p,
		gp_Pnt	lineStart,
		gp_Pnt	lineStop
	)

◆ ProjectPointOnPlane()

TIGL_EXPORT gp_Pnt2d ProjectPointOnPlane	(	gp_Pln	pln,
		gp_Pnt	p
	)

◆ ProjectPointOnShape()

TIGL_EXPORT gp_Pnt ProjectPointOnShape	(	const TopoDS_Shape &	shape,
		const gp_Pnt &	point,
		const gp_Vec &	direction
	)

◆ ProjectPointOnWire()

TIGL_EXPORT Standard_Real ProjectPointOnWire	(	const TopoDS_Wire &	wire,
		gp_Pnt	p
	)

◆ ProjectPointOnWireAtAngle()

TIGL_EXPORT Standard_Real ProjectPointOnWireAtAngle	(	const TopoDS_Wire &	wire,
		gp_Pnt	p,
		gp_Dir	rotationAxisAroundP,
		double	angle
	)

◆ Radians()

double Radians ( double degree )

inline

◆ RemoveDuplicateEdges()

TIGL_EXPORT TopoDS_Shape RemoveDuplicateEdges ( const TopoDS_Shape & shape )

◆ ReplaceAdjacentWithMerged()

template<class ArrayType , typename BinaryPredicate , typename BinaryMerge >

void ReplaceAdjacentWithMerged	(	ArrayType &	list,
		BinaryPredicate	is_adjacent,
		BinaryMerge	merged
	)

◆ ReplaceFaceInShape()

TIGL_EXPORT TopoDS_Shape ReplaceFaceInShape	(	TopoDS_Shape const &	shape,
		TopoDS_Face const &	new_face,
		TopoDS_Face const &	old_face
	)

ReplaceFaceInShape returns a new shape that corresponds to the input shape, except that old_face is replaced by new_face.

Parameters

shape	The input shape
new_face	the new face that shall take the place of the old shape
old_face	the old face to be replaced

Returns: the shape with the replaced faces

◆ SortWireEdges()

TIGL_EXPORT TopoDS_Wire SortWireEdges ( const TopoDS_Wire & wire )

◆ SplitShape()

TIGL_EXPORT TopoDS_Shape SplitShape	(	const TopoDS_Shape &	src,
		const TopoDS_Shape &	tool
	)

◆ TiglAxisToCTiglPoint()

TIGL_EXPORT tigl::CTiglPoint TiglAxisToCTiglPoint ( TiglAxis axis )

◆ TransformedShape() [1/2]

TIGL_EXPORT TopoDS_Shape TransformedShape	(	const tigl::CTiglTransformation &	transformationToGlobal,
		TiglCoordinateSystem	cs,
		const TopoDS_Shape &	shape
	)

◆ TransformedShape() [2/2]

TIGL_EXPORT TopoDS_Shape TransformedShape	(	const tigl::CTiglRelativelyPositionedComponent &	component,
		TiglCoordinateSystem	cs,
		const TopoDS_Shape &	shape
	)

◆ TrimFace()

TIGL_EXPORT TopoDS_Face TrimFace	(	TopoDS_Face const &	face,
		double	umin,
		double	umax,
		double	vmin,
		double	vmax
	)

TrimFace trims a face given new minimum and maximum values for the (u,v)- coordinates.

Parameters

face	The face to be trimmed
umin	new minimum u value
umax	new maximum u value
vmin	new minimum v value
vmax	new maximum v value

Returns: the trimmed face

◆ WireGetPoint()

TIGL_EXPORT gp_Pnt WireGetPoint	(	const TopoDS_Wire &	wire,
		double	alpha
	)

◆ WireGetPointTangent()

TIGL_EXPORT void WireGetPointTangent	(	const TopoDS_Wire &	wire,
		double	alpha,
		gp_Pnt &	point,
		gp_Vec &	normal
	)

Data Structures

Typedefs

Enumerations

Functions

Typedef Documentation

◆ ShapeMap

Enumeration Type Documentation

◆ IntStatus

Function Documentation

◆ AllSame()

◆ ApproximateArcOfCircleToRationalBSpline()

◆ BuildFace() [1/4]

◆ BuildFace() [2/4]

◆ BuildFace() [3/4]

◆ BuildFace() [4/4]

◆ BuildRuledFace()

◆ BuildWire()

◆ BuildWireFromEdges()

◆ BuildWireRectangle()

◆ BuildWiresFromConnectedEdges()

◆ BuildWireSuperEllipse()

◆ CheckCommonVertex()

◆ Clamp() [1/3]

◆ Clamp() [2/3]

◆ Clamp() [3/3]

◆ CloseWire()

◆ CloseWires() [1/2]

◆ CloseWires() [2/2]

◆ Contains()

◆ CutShapes()

◆ Degrees()

◆ EdgeGetPoint()

◆ EdgeGetPointTangent()

◆ EdgeGetPointTangentBasedOnParam()

◆ EdgeSplineFromPoints()

◆ FileExtension()

◆ FindAllConnectedEdges()

◆ FindIndex()

◆ GetArea()

◆ GetCenterOfMass()

◆ GetCentralFacePoint()

◆ GetComponentHashCode()

◆ GetEdge()

◆ getEdgeContinuity()

◆ GetEndVertices()

◆ GetFace()

◆ GetFaceAndUV()

◆ GetFacesByName()

◆ GetFirstPoint() [1/3]

◆ GetFirstPoint() [2/3]

◆ GetFirstPoint() [3/3]

◆ GetHash()

◆ GetIntersectionPoint() [1/3]

◆ GetIntersectionPoint() [2/3]

◆ GetIntersectionPoint() [3/3]

◆ GetLastPoint() [1/3]

◆ GetLastPoint() [2/3]

◆ GetLastPoint() [3/3]

◆ GetLength() [1/2]

◆ GetLength() [2/2]

◆ GetListOfShape()

◆ GetMinMaxPoint()

◆ GetNearestFace()

◆ GetNumberOfEdges()

◆ GetNumberOfFaces()

◆ GetNumberOfSubshapes()

◆ GetShapeExtension()

◆ GetSingleFace()

◆ GetSubShapes()

◆ GroupFaces()

◆ Handle()

◆ IndexFromUid()

◆ IntersectLinePlane()

◆ IsEqual()

◆ IsFaceBetweenPoints()

◆ IsFileReadable()

◆ IsPathRelative()

◆ IsPointAbovePlane()

◆ IsPointInsideFace()

◆ IsPointInsideShape()